Company registration number 4745998 (England and Wales)
MANUFACTURING SERVICE SOLUTIONS LIMITED
ANNUAL REPORT AND FINANCIAL STATEMENTS
FOR THE YEAR ENDED 31 DECEMBER 2024
MANUFACTURING SERVICE SOLUTIONS LIMITED
COMPANY INFORMATION
Directors
AC J Bongaerts
(Appointed 20 March 2025)
K Wyckmans
(Appointed 20 March 2025)
Company number
4745998
Registered office
Technology House
Hempstead Industrial Estate
Hemel Hempstead
Herts
HP2 7DF
Auditors
Duncan & Toplis Audit Limited
Park House
37 Clarence Street
Leicester
LE1 3RW
Business address
Unit 9-12
Allerton Road
Rugby
Warwickshire
CV23 0PA
MANUFACTURING SERVICE SOLUTIONS LIMITED
CONTENTS
Page
Strategic report
1
Directors' report
2
Directors' responsibilities statement
3
Independent auditor's report
4 - 7
Statement of income and retained earnings
8
Balance sheet
9
Statement of cash flows
10
Notes to the financial statements
11 - 24
MANUFACTURING SERVICE SOLUTIONS LIMITED
STRATEGIC REPORT
FOR THE YEAR ENDED 31 DECEMBER 2024
- 1 -
The directors present the strategic report for the year ended 31 December 2024.
Review of the business
The turnover for the year has decreased from £14.33m to £11.89m whilst gross profit has also decreased from £3.89m to £3.29m it has increased as a percentage to turnover. Considering the difficult trading conditions faced during the year and inflationary pressures that were experienced worldwide, the directors are satisfied with this result
Principal risks and uncertainties
The Directors consider the potential risks to be similar to those faced by similar companies in the sector, principally to do with the continuity of supply, the maintenance of their customers, foreign exchange variations and more specifically the global inflationary pressures being faced.
Considerable emphasis is devoted to maintaining service levels with customers and working closely with suppliers on logistical and quality issues to ensure that high levels of performance are achieved.
Staff are encouraged to fully contribute to the business and the directors recognise that the future success of the business depends on the retention and dedication of key employees.
Key performance indicators
The key performance indicators that the directors monitor the business by are turnover achieved, margins achieved and the net current assets position
Other information and explanations
Future developments
The directors consider that the company’s marketplace will remain competitive in the near future. However, the directors are confident that they have successfully overcome recent challenges and have a robust and secure management, processes and financing to continue to grow as national and global circumstances permit.
Research and development
The company has several current and potential projects in new technology as well as developments to our current product range. These will keep us at the forefront of the market and ensure we remain the market leaders in our field, by capitalising on both technological developments as well as listening to the new demands in the industry.
Events after the reporting date
Following the year end the entire share capital of the company was purchased by Atlas Copco UK Holdings Limited.
K Wyckmans
Director
29 September 2025
MANUFACTURING SERVICE SOLUTIONS LIMITED
DIRECTORS' REPORT
FOR THE YEAR ENDED 31 DECEMBER 2024
- 2 -
The directors present their annual report and financial statements for the year ended 31 December 2024.
Principal activities
The principal activity of the company continued to be that of the supply of high pressure Nitrogen Generation, Gas Mixing and Gas Filtration equipment for laser cutting systems.
Results and dividends
The results for the year are set out on page 8.
No ordinary dividends were paid. The directors do not recommend payment of a final dividend.
Directors
The directors who held office during the year and up to the date of signature of the financial statements were as follows:
Mr CA Gonzalez-Lee
(Resigned 20 March 2025)
AC J Bongaerts
(Appointed 20 March 2025)
K Wyckmans
(Appointed 20 March 2025)
Strategic report
**The company has chosen in accordance with Companies Act 2006, s. 414C(11) to set out in the company's strategic report information required by Large and Medium-sized Companies and Groups (Accounts and Reports) Regulations 2008, Sch. 7 to be contained in the directors' report. It has done so in respect of research and development and important events since the year end.
Statement of disclosure to auditor
So far as each person who was a director at the date of approving this report is aware, there is no relevant audit information of which the company’s auditor is unaware. Additionally, the directors individually have taken all the necessary steps that they ought to have taken as directors in order to make themselves aware of all relevant audit information and to establish that the company’s auditor is aware of that information.
Medium-sized companies exemption
This report has been prepared in accordance with the provisions applicable to companies entitled to the medium-sized companies exemption.
On behalf of the board
K Wyckmans
Director
29 September 2025
MANUFACTURING SERVICE SOLUTIONS LIMITED
DIRECTORS' RESPONSIBILITIES STATEMENT
FOR THE YEAR ENDED 31 DECEMBER 2024
- 3 -
The directors are responsible for preparing the annual report and the financial statements in accordance with applicable law and regulations.
Company law requires the directors to prepare financial statements for each financial year. Under that law the directors have elected to prepare the financial statements in accordance with United Kingdom Generally Accepted Accounting Practice (United Kingdom Accounting Standards and applicable law). Under company law, the directors must not approve the financial statements unless they are satisfied that they give a true and fair view of the state of affairs of the company and of the profit or loss of the company for that period.
In preparing these financial statements, the directors are required to:
select suitable accounting policies and then apply them consistently;
make judgements and accounting estimates that are reasonable and prudent; and
prepare the financial statements on the going concern basis unless it is inappropriate to presume that the company will continue in business.
The directors are responsible for keeping adequate accounting records that are sufficient to show and explain the company’s transactions and disclose with reasonable accuracy at any time the financial position of the company and enable them to ensure that the financial statements comply with the Companies Act 2006. They are also responsible for safeguarding the assets of the company and hence for taking reasonable steps for the prevention and detection of fraud and other irregularities.
MANUFACTURING SERVICE SOLUTIONS LIMITED
INDEPENDENT AUDITOR'S REPORT
TO THE MEMBER OF MANUFACTURING SERVICE SOLUTIONS LIMITED
- 4 -
Qualified opinion on financial statements
We have audited the financial statements of Manufacturing Service Solutions Limited (the 'company') for the year ended 31 December 2024 which comprise the statement of income and retained earnings, the balance sheet, the statement of cash flows and notes to the financial statements, including significant accounting policies. The financial reporting framework that has been applied in their preparation is applicable law and United Kingdom Accounting Standards, including Financial Reporting Standard 102 The Financial Reporting Standard applicable in the UK and Republic of Ireland (United Kingdom Generally Accepted Accounting Practice).
In our opinion, except for the effects of the matter described in the basis for qualified opinion section of our report, the financial statements:
give a true and fair view of the state of the company's affairs as at 31 December 2024 and of its profit for the year then ended;
have been properly prepared in accordance with United Kingdom Generally Accepted Accounting Practice; and
have been prepared in accordance with the requirements of the Companies Act 2006.
Basis for qualified opinion
We conducted our audit in accordance with International Standards on Auditing (UK) (ISAs (UK)) and applicable law. Our responsibilities under those standards are further described in the Auditor's responsibilities for the audit of the financial statements section of our report. We are independent of the company in accordance with the ethical requirements that are relevant to our audit of the financial statements in the UK, including the FRC’s Ethical Standard, and we have fulfilled our other ethical responsibilities in accordance with these requirements. We believe that the audit evidence we have obtained is sufficient and appropriate to provide a basis for our opinion.
We were unable to observe the counting of physical stock held at 31 December 2024 and 31 December 2023 because we were not appointed as auditor of the company until post year end.
We were unable to satisfy ourselves by alternative means concerning the stock quantities of £3,208,904 for the year ended 31 December 2024 and £2,929,565 for the year ended 31 December 2023. Consequently, we were unable to determine whether any adjustment to this amount in the balance sheet at 31 December 2024 and 31 December 2023 was necessary or whether there was any consequential effect on cost of sales for the year ended 31 December 2024.
Conclusions relating to going concern
In auditing the financial statements, we have concluded that the directors' use of the going concern basis of accounting in the preparation of the financial statements is appropriate.
Based on the work we have performed, we have not identified any material uncertainties relating to events or conditions that, individually or collectively, may cast significant doubt on the company's ability to continue as a going concern for a period of at least twelve months from when the financial statements are authorised for issue.
Our responsibilities and the responsibilities of the directors with respect to going concern are described in the relevant sections of this report.
MANUFACTURING SERVICE SOLUTIONS LIMITED
INDEPENDENT AUDITOR'S REPORT
TO THE MEMBER OF MANUFACTURING SERVICE SOLUTIONS LIMITED (CONTINUED)
- 5 -
The other information comprises the information included in the annual report other than the financial statements and our auditor's report thereon. The directors are responsible for the other information contained within the annual report. Our opinion on the financial statements does not cover the other information and, except to the extent otherwise explicitly stated in our report, we do not express any form of assurance conclusion thereon. Our responsibility is to read the other information and, in doing so, consider whether the other information is materially inconsistent with the financial statements or our knowledge obtained in the course of the audit, or otherwise appears to be materially misstated. If we identify such material inconsistencies or apparent material misstatements, we are required to determine whether this gives rise to a material misstatement in the financial statements themselves. If, based on the work we have performed, we conclude that there is a material misstatement of this other information, we are required to report that fact.
We have nothing to report in this regard.
Opinions on other matters prescribed by the Companies Act 2006
In our opinion, based on the work undertaken in the course of our audit:
the information given in the strategic report and the directors' report for the financial year for which the financial statements are prepared is consistent with the financial statements; and
the strategic report and the directors' report have been prepared in accordance with applicable legal requirements.
Matters on which we are required to report by exception
In the light of the knowledge and understanding of the company and its environment obtained in the course of the audit, we have not identified material misstatements in the strategic report or the directors' report.
We have nothing to report in respect of the following matters in relation to which the Companies Act 2006 requires us to report to you if, in our opinion:
adequate accounting records have not been kept, or returns adequate for our audit have not been received from branches not visited by us; or
the financial statements are not in agreement with the accounting records and returns; or
certain disclosures of directors' remuneration specified by law are not made; or
we have not received all the information and explanations we require for our audit.
Responsibilities of directors
As explained more fully in the directors' responsibilities statement, the directors are responsible for the preparation of the financial statements and for being satisfied that they give a true and fair view, and for such internal control as the directors determine is necessary to enable the preparation of financial statements that are free from material misstatement, whether due to fraud or error. In preparing the financial statements, the directors are responsible for assessing the company's ability to continue as a going concern, disclosing, as applicable, matters related to going concern and using the going concern basis of accounting unless the directors either intend to liquidate the company or to cease operations, or have no realistic alternative but to do so.
Auditor's responsibilities for the audit of the financial statements
Our objectives are to obtain reasonable assurance about whether the financial statements as a whole are free from material misstatement, whether due to fraud or error, and to issue an auditor's report that includes our opinion. Reasonable assurance is a high level of assurance but is not a guarantee that an audit conducted in accordance with ISAs (UK) will always detect a material misstatement when it exists. Misstatements can arise from fraud or error and are considered material if, individually or in the aggregate, they could reasonably be expected to influence the economic decisions of users taken on the basis of these financial statements.
The extent to which our procedures are capable of detecting irregularities, including fraud, is detailed below.
MANUFACTURING SERVICE SOLUTIONS LIMITED
INDEPENDENT AUDITOR'S REPORT
TO THE MEMBER OF MANUFACTURING SERVICE SOLUTIONS LIMITED (CONTINUED)
- 6 -
Identifying and assessing potential risks related to irregularities
The capability to detect irregularities is based on the auditor identifying and assessing the risks of material misstatement of the financial statements, whether due to fraud or error, and then designing and performing audit procedures responsive to those risks, including obtaining audit evidence that is sufficient and appropriate to provide a basis for our opinion.
a) Identifying and assessing potential risks related to irregularities
In identifying and assessing risks of material misstatement in respect of irregularities, including fraud and non-compliance with laws and regulations, the following approach was taken:
- Understanding the nature of the industry and sector, control environment and business performance;
- Consideration of the results of our enquiries of management and those charged with governance about their own identification and assessment of the risks of irregularities;
- Understanding the company's policies and procedures on compliance with laws and regulations and management of fraud risk, including documentation of instances of non-compliance of laws and regulations and instances of actual, suspected or alleged fraud;
- Consideration of matters discussed among the audit engagement team regarding how and where fraud might occur in the financial statements and any potential indicators of fraud;
- Understanding the legal and regulatory frameworks that the company operates in through enquiry of management and those charged with governance and understanding the company's industry and sector. The key laws and regulations that were considered to have an effect on material amounts and disclosures in the financial statements included the Companies Act and tax legislation.
Based on this understanding, the following audit procedures were designed and performed to respond to the risks identified:
- Reviewing the financial statement disclosures and testing to supporting documentation to assess compliance with applicable laws and regulations described as having a direct effect on the financial statement;
- Enquiring of management, those charged with governance and, where applicable, the company's solicitors concerning actual and potential litigation and claims;
- Performing analytical procedures to identify any unusual or unexpected relationships that may indicate risks of material misstatement due to fraud;
- Reviewing minutes of meetings of those charged with governance and, where applicable, correspondence with regulators;
- Performing audit work over the risk of management override of controls, including testing of journal entries and other adjustments for appropriateness and evaluating the business rationale of significant transactions outside the normal course of business;
- Communication of potential fraud risks to all engagement team members and remaining alert to any indications of fraud or non-compliance with laws and regulations throughout the audit.
Because of the inherent limitations of an audit, there is a risk that we will not detect all irregularities, including those leading to a material misstatement in the financial statements or non-compliance with regulation. This risk increases the more that compliance with a law or regulation is removed from the events and transactions reflected in the financial statements, as we will be less likely to become aware of instances of non-compliance. The risk is also greater regarding irregularities occurring due to fraud rather than error, as fraud involves intentional concealment, forgery, collusion, omission or misrepresentation.
A further description of our responsibilities is available on the Financial Reporting Council’s website at: https://www.frc.org.uk/auditorsresponsibilities. This description forms part of our auditor's report.
In the prior year the directors took advantage of section 477 of the Companies Act 2006 for the financial statements not to be audited. As a result the comparatives shown in these financial statements are not audited
MANUFACTURING SERVICE SOLUTIONS LIMITED
INDEPENDENT AUDITOR'S REPORT
TO THE MEMBER OF MANUFACTURING SERVICE SOLUTIONS LIMITED (CONTINUED)
- 7 -
Mr Matthew Smith
Senior Statutory Auditor
For and on behalf of Duncan & Toplis Audit Limited
29 September 2025
Chartered Certified Accountants
Statutory Auditor
Park House
37 Clarence Street
Leicester
LE1 3RW
MANUFACTURING SERVICE SOLUTIONS LIMITED
STATEMENT OF INCOME AND RETAINED EARNINGS
FOR THE YEAR ENDED 31 DECEMBER 2024
- 8 -
2024
2023
as restated
Notes
£
£
Turnover
2
11,892,023
14,326,351
Cost of sales
(8,606,677)
(10,435,008)
Gross profit
3,285,346
3,891,343
Administrative expenses
(2,993,839)
(2,469,260)
Other operating income
720,000
724,400
Operating profit
3
1,011,507
2,146,483
Interest receivable and similar income
6
18,401
Interest payable and similar expenses
7
(9,773)
(32,527)
Profit before taxation
1,020,135
2,113,956
Tax on profit
8
(129,351)
(301,163)
Profit for the financial year
890,784
1,812,793
Retained earnings brought forward
4,650,453
2,837,660
Retained earnings carried forward
5,541,237
4,650,453
The profit and loss account has been prepared on the basis that all operations are continuing operations.
MANUFACTURING SERVICE SOLUTIONS LIMITED
BALANCE SHEET
AS AT
31 DECEMBER 2024
31 December 2024
- 9 -
2024
2023
as restated
Notes
£
£
£
£
Fixed assets
Tangible assets
11
390,641
296,173
Investments
9
100
100
390,741
296,273
Current assets
Stocks
12
3,208,904
2,929,565
Debtors
13
4,164,237
2,425,017
Cash at bank and in hand
1,228,018
1,544,248
8,601,159
6,898,830
Creditors: amounts falling due within one year
14
(3,293,713)
(2,520,351)
Net current assets
5,307,446
4,378,479
Total assets less current liabilities
5,698,187
4,674,752
Creditors: amounts falling due after more than one year
15
(103,694)
(3,392)
Provisions for liabilities
Deferred tax liability
17
53,255
20,906
(53,255)
(20,906)
Net assets
5,541,238
4,650,454
Capital and reserves
Called up share capital
19
1
1
Profit and loss reserves
21
5,541,237
4,650,453
Total equity
5,541,238
4,650,454
These financial statements have been prepared in accordance with the provisions relating to medium-sized companies.
The financial statements were approved by the board of directors and authorised for issue on 29 September 2025 and are signed on its behalf by:
K Wyckmans
Director
Company registration number 4745998 (England and Wales)
MANUFACTURING SERVICE SOLUTIONS LIMITED
STATEMENT OF CASH FLOWS
FOR THE YEAR ENDED 31 DECEMBER 2024
- 10 -
2024
2023
as restated
Notes
£
£
£
£
Cash flows from operating activities
Cash generated from operations
25
2,574,800
1,180,356
Interest paid
(9,773)
(32,527)
Income taxes (paid)/refunded
(325,272)
1
Net cash inflow from operating activities
2,239,755
1,147,830
Investing activities
Purchase of tangible fixed assets
(255,970)
(68,902)
Proceeds from disposal of tangible fixed assets
73,448
22,208
Amounts loaned to directors
(2,422,220)
Interest received
18,401
Net cash used in investing activities
(2,586,341)
(46,694)
Financing activities
Repayment of bank loans
(740,913)
Payment of finance leases obligations
30,356
(58,373)
Net cash generated from/(used in) financing activities
30,356
(799,286)
Net (decrease)/increase in cash and cash equivalents
(316,230)
301,850
Cash and cash equivalents at beginning of year
1,544,248
1,242,398
Cash and cash equivalents at end of year
1,228,018
1,544,248
MANUFACTURING SERVICE SOLUTIONS LIMITED
NOTES TO THE FINANCIAL STATEMENTS
FOR THE YEAR ENDED 31 DECEMBER 2024
- 11 -
1
Accounting policies
Company information
Manufacturing Service Solutions Limited is a private company limited by shares incorporated in England and Wales. The registered office is Technology House, Hempstead Industrial Estate, Hemel Hempstead, Herts, HP2 7DF. The principal place of business is Unit 9-12, Allerton Road, Rugby, Warwickshire, CV23 0PA.
1.1
Basis of preparation
These financial statements have been prepared in accordance with FRS 102 “The Financial Reporting Standard applicable in the UK and Republic of Ireland” (“FRS 102”) and the requirements of the Companies Act 2006.
The financial statements are prepared in sterling, which is the functional currency of the company. Monetary amounts in these financial statements are rounded to the nearest £.
The financial statements have been prepared under the historical cost convention, [modified to include the revaluation of freehold properties and to include investment properties and certain financial instruments at fair value]. The principal accounting policies adopted are set out below.
1.2
Going concern
Atruet the time of approving the financial statements, the directors have a reasonable expectation that the company has adequate resources to continue in operational existence for the foreseeable future. Thus the directors continue to adopt the going concern basis of accounting in preparing the financial statements.
1.3
Turnover
Revenue comprises sales of goods or services provided to customers net of value added tax and other sales taxes, less an appropriate deduction for actual and expected returns and discounts. Revenue is recognised when performance obligations are satisfied and the control of goods or services is transferred to the buyer. Where the performance obligation is satisfied over time, revenue is recognised in accordance with its progress towards complete satisfaction of that performance obligation.
When cash inflows are deferred and represent a financing arrangement, the promised consideration is adjusted for the effects of the time value of money, which is recognised as interest income.
The nature, timing of satisfaction of performance obligations and significant payment terms of the company's major sources of revenue are as follows:
Revenue from the sale of goods is recognised when the significant risks and rewards of ownership of the goods have passed to the buyer (usually on dispatch of the goods), the amount of revenue can be measured reliably, it is probable that the economic benefits associated with the transaction will flow to the entity and the costs incurred or to be incurred in respect of the transaction can be measured reliably.
Revenue from contracts for the provision of professional services is recognised by reference to the stage of completion when the stage of completion, costs incurred and costs to complete can be estimated reliably. The stage of completion is calculated by comparing costs incurred, mainly in relation to contractual hourly staff rates and materials, as a proportion of total costs. Where the outcome cannot be estimated reliably, revenue is recognised only to the extent of the expenses recognised that are recoverable.
1.4
Tangible fixed assets
Tangible fixed assets are initially measured at cost and subsequently measured at cost or valuation, net of depreciation and any impairment losses.
MANUFACTURING SERVICE SOLUTIONS LIMITED
NOTES TO THE FINANCIAL STATEMENTS (CONTINUED)
FOR THE YEAR ENDED 31 DECEMBER 2024
1
Accounting policies
(Continued)
- 12 -
Depreciation is recognised so as to write off the cost or valuation of assets less their residual values over their useful lives on the following bases:
Leasehold improvements
4% on cost and 10% on cost
Plant and equipment
20% on cost
Fixtures and fittings
20% reducing balance
Motor vehicles
25% on cost
The gain or loss arising on the disposal of an asset is determined as the difference between the sale proceeds and the carrying value of the asset, and is credited or charged to profit or loss.
1.5
Fixed asset investments
Interests in subsidiaries, associates and jointly controlled entities are initially measured at cost and subsequently measured at cost less any accumulated impairment losses. The investments are assessed for impairment at each reporting date and any impairment losses or reversals of impairment losses are recognised immediately in profit or loss.
A subsidiary is an entity controlled by the company. Control is the power to govern the financial and operating policies of the entity so as to obtain benefits from its activities.
An associate is an entity, being neither a subsidiary nor a joint venture, in which the company holds a long-term interest and where the company has significant influence. The company considers that it has significant influence where it has the power to participate in the financial and operating decisions of the associate.
Entities in which the company has a long term interest and shares control under a contractual arrangement are classified as jointly controlled entities.
1.6
Impairment of fixed assets
At each reporting period end date, the company reviews the carrying amounts of its tangible assets to determine whether there is any indication that those assets have suffered an impairment loss. If any such indication exists, the recoverable amount of the asset is estimated in order to determine the extent of the impairment loss (if any). Where it is not possible to estimate the recoverable amount of an individual asset, the company estimates the recoverable amount of the cash-generating unit to which the asset belongs.
Recoverable amount is the higher of fair value less costs to sell and value in use. In assessing value in use, the estimated future cash flows are discounted to their present value using a pre-tax discount rate that reflects current market assessments of the time value of money and the risks specific to the asset for which the estimates of future cash flows have not been adjusted.
If the recoverable amount of an asset (or cash-generating unit) is estimated to be less than its carrying amount, the carrying amount of the asset (or cash-generating unit) is reduced to its recoverable amount. An impairment loss is recognised immediately in profit or loss, unless the relevant asset is carried at a revalued amount, in which case the impairment loss is treated as a revaluation decrease.
Recognised impairment losses are reversed if, and only if, the reasons for the impairment loss have ceased to apply. Where an impairment loss subsequently reverses, the carrying amount of the asset (or cash-generating unit) is increased to the revised estimate of its recoverable amount, but so that the increased carrying amount does not exceed the carrying amount that would have been determined had no impairment loss been recognised for the asset (or cash-generating unit) in prior years. A reversal of an impairment loss is recognised immediately in profit or loss, unless the relevant asset is carried at a revalued amount, in which case the reversal of the impairment loss is treated as a revaluation increase.
MANUFACTURING SERVICE SOLUTIONS LIMITED
NOTES TO THE FINANCIAL STATEMENTS (CONTINUED)
FOR THE YEAR ENDED 31 DECEMBER 2024
1
Accounting policies
(Continued)
- 13 -
1.7
Stocks
Stocks are stated at the lower of cost and estimated selling price less costs to complete and sell. Cost comprises direct materials and, where applicable, direct labour costs and those overheads that have been incurred in bringing the stocks to their present location and condition.
Stocks held for distribution at no or nominal consideration are measured at the lower of cost and replacement cost, adjusted where applicable for any loss of service potential.
1.8
Cash and cash equivalents
Cash and cash equivalents are basic financial assets and include cash in hand, deposits held at call with banks, other short-term liquid investments with original maturities of three months or less, and bank overdrafts. Bank overdrafts are shown within borrowings in current liabilities.
1.9
Financial instruments
The company has elected to apply the provisions of Section 11 ‘Basic Financial Instruments’ and Section 12 ‘Other Financial Instruments Issues’ of FRS 102 to all of its financial instruments.
Financial instruments are recognised in the company's balance sheet when the company becomes party to the contractual provisions of the instrument.
Financial assets and liabilities are offset, with the net amounts presented in the financial statements, when there is a legally enforceable right to set off the recognised amounts and there is an intention to settle on a net basis or to realise the asset and settle the liability simultaneously.
Basic financial assets
Basic financial assets, which include debtors and cash and bank balances, are initially measured at transaction price including transaction costs and are subsequently carried at amortised cost using the effective interest method unless the arrangement constitutes a financing transaction, where the transaction is measured at the present value of the future receipts discounted at a market rate of interest. Financial assets classified as receivable within one year are not amortised.
Other financial assets
Other financial assets, including investments in equity instruments which are not subsidiaries, associates or joint ventures, are initially measured at fair value, which is normally the transaction price. Such assets are subsequently carried at fair value and the changes in fair value are recognised in profit or loss, except that investments in equity instruments that are not publicly traded and whose fair values cannot be measured reliably are measured at cost less impairment.
Impairment of financial assets
Financial assets, other than those held at fair value through profit and loss, are assessed for indicators of impairment at each reporting end date.
Financial assets are impaired where there is objective evidence that, as a result of one or more events that occurred after the initial recognition of the financial asset, the estimated future cash flows have been affected. If an asset is impaired, the impairment loss is the difference between the carrying amount and the present value of the estimated cash flows discounted at the asset’s original effective interest rate. The impairment loss is recognised in profit or loss.
If there is a decrease in the impairment loss arising from an event occurring after the impairment was recognised, the impairment is reversed. The reversal is such that the current carrying amount does not exceed what the carrying amount would have been, had the impairment not previously been recognised. The impairment reversal is recognised in profit or loss.
MANUFACTURING SERVICE SOLUTIONS LIMITED
NOTES TO THE FINANCIAL STATEMENTS (CONTINUED)
FOR THE YEAR ENDED 31 DECEMBER 2024
1
Accounting policies
(Continued)
- 14 -
Derecognition of financial assets
Financial assets are derecognised only when the contractual rights to the cash flows from the asset expire or are settled, or when the company transfers the financial asset and substantially all the risks and rewards of ownership to another entity, or if some significant risks and rewards of ownership are retained but control of the asset has transferred to another party that is able to sell the asset in its entirety to an unrelated third party.
Classification of financial liabilities
Financial liabilities and equity instruments are classified according to the substance of the contractual arrangements entered into. An equity instrument is any contract that evidences a residual interest in the assets of the company after deducting all of its liabilities.
Basic financial liabilities
Basic financial liabilities, including creditors, bank loans, loans from fellow group companies and preference shares that are classified as debt, are initially recognised at transaction price unless the arrangement constitutes a financing transaction, where the debt instrument is measured at the present value of the future payments discounted at a market rate of interest. Financial liabilities classified as payable within one year are not amortised.
Debt instruments are subsequently carried at amortised cost, using the effective interest rate method.
Trade creditors are obligations to pay for goods or services that have been acquired in the ordinary course of business from suppliers. Amounts payable are classified as current liabilities if payment is due within one year or less. If not, they are presented as non-current liabilities. Trade creditors are recognised initially at transaction price and subsequently measured at amortised cost using the effective interest method.
Other financial liabilities
Derivatives, including interest rate swaps and forward foreign exchange contracts, are not basic financial instruments. Derivatives are initially recognised at fair value on the date a derivative contract is entered into and are subsequently re-measured at their fair value. Changes in the fair value of derivatives are recognised in profit or loss in finance costs or finance income as appropriate, unless hedge accounting is applied and the hedge is a cash flow hedge.
Debt instruments that do not meet the conditions in FRS 102 paragraph 11.9 are subsequently measured at fair value through profit or loss. Debt instruments may be designated as being measured at fair value through profit or loss to eliminate or reduce an accounting mismatch or if the instruments are measured and their performance evaluated on a fair value basis in accordance with a documented risk management or investment strategy.
Derecognition of financial liabilities
Financial liabilities are derecognised when the company’s contractual obligations expire or are discharged or cancelled.
1.10
Equity instruments
Equity instruments issued by the company are recorded at the proceeds received, net of transaction costs. Dividends payable on equity instruments are recognised as liabilities once they are no longer at the discretion of the company.
1.11
Taxation
The tax expense represents the sum of the tax currently payable and deferred tax.
MANUFACTURING SERVICE SOLUTIONS LIMITED
NOTES TO THE FINANCIAL STATEMENTS (CONTINUED)
FOR THE YEAR ENDED 31 DECEMBER 2024
1
Accounting policies
(Continued)
- 15 -
Current tax
The tax currently payable is based on taxable profit for the year. Taxable profit differs from net profit as reported in the profit and loss account because it excludes items of income or expense that are taxable or deductible in other years and it further excludes items that are never taxable or deductible. The company’s liability for current tax is calculated using tax rates that have been enacted or substantively enacted by the reporting end date.
Deferred tax
Deferred tax liabilities are generally recognised for all timing differences and deferred tax assets are recognised to the extent that it is probable that they will be recovered against the reversal of deferred tax liabilities or other future taxable profits. Such assets and liabilities are not recognised if the timing difference arises from goodwill or from the initial recognition of other assets and liabilities in a transaction that affects neither the tax profit nor the accounting profit.
The carrying amount of deferred tax assets is reviewed at each reporting end date and reduced to the extent that it is no longer probable that sufficient taxable profits will be available to allow all or part of the asset to be recovered. Deferred tax is calculated at the tax rates that are expected to apply in the period when the liability is settled or the asset is realised. Deferred tax is charged or credited in the profit and loss account, except when it relates to items charged or credited directly to equity, in which case the deferred tax is also dealt with in equity. Deferred tax assets and liabilities are offset when the company has a legally enforceable right to offset current tax assets and liabilities and the deferred tax assets and liabilities relate to taxes levied by the same tax authority.
1.12
Employee benefits
The costs of short-term employee benefits are recognised as a liability and an expense, unless those costs are required to be recognised as part of the cost of stock or fixed assets.
The cost of any unused holiday entitlement is recognised in the period in which the employee’s services are received.
Termination benefits are recognised immediately as an expense when the company is demonstrably committed to terminate the employment of an employee or to provide termination benefits.
1.13
Retirement benefits
Payments to defined contribution retirement benefit schemes are charged as an expense as they fall due.
1.14
Leases
As lessee
Leases are classified as finance leases whenever the terms of the lease transfer substantially all the risks and rewards of ownership to the lessees. All other leases are classified as operating leases.
Assets held under finance leases are recognised as assets at the lower of the assets fair value at the date of inception and the present value of the minimum lease payments. The related liability is included in the balance sheet as a finance lease obligation. Lease payments are treated as consisting of capital and interest elements. The interest is charged to profit or loss so as to produce a constant periodic rate of interest on the remaining balance of the liability.
As lessor
Rental income from operating leases is recognised on a straight line basis over the term of the relevant lease. Initial direct costs incurred in negotiating and arranging an operating lease are added to the carrying amount of the leased asset and recognised on a straight line basis over the lease term.
MANUFACTURING SERVICE SOLUTIONS LIMITED
NOTES TO THE FINANCIAL STATEMENTS (CONTINUED)
FOR THE YEAR ENDED 31 DECEMBER 2024
1
Accounting policies
(Continued)
- 16 -
1.15
Foreign exchange
Transactions in currencies other than pounds sterling are recorded at the rates of exchange prevailing at the dates of the transactions. At each reporting end date, monetary assets and liabilities that are denominated in foreign currencies are retranslated at the rates prevailing on the reporting end date. Gains and losses arising on translation in the period are included in profit or loss.
2
Turnover and other revenue
2024
2023
£
£
Turnover analysed by geographical market
UK
5,768,445
6,336,923
Rest of the World
6,123,578
7,989,428
11,892,023
14,326,351
2024
2023
£
£
Other revenue
Interest income
18,401
-
3
Operating profit
2024
2023
Operating profit for the year is stated after charging/(crediting):
£
£
Exchange gains
(29,167)
(57,536)
Fees payable to the company's auditor for the audit of the company's financial statements
15,000
Depreciation of tangible fixed assets
130,188
125,346
Profit on disposal of tangible fixed assets
(42,133)
(16,926)
4
Employees
The average monthly number of persons (including directors) employed by the company during the year was:
2024
2023
Number
Number
Average number of employees
38
34
MANUFACTURING SERVICE SOLUTIONS LIMITED
NOTES TO THE FINANCIAL STATEMENTS (CONTINUED)
FOR THE YEAR ENDED 31 DECEMBER 2024
4
Employees
(Continued)
- 17 -
Their aggregate remuneration comprised:
2024
2023
£
£
Wages and salaries
2,146,971
1,888,890
Social security costs
259,229
223,951
Pension costs
100,902
76,264
2,507,102
2,189,105
5
Directors' remuneration
2024
2023
£
£
Remuneration for qualifying services
503,116
504,071
Remuneration disclosed above include the following amounts paid to the highest paid director:
2024
2023
£
£
Remuneration for qualifying services
503,116
504,071
6
Interest receivable and similar income
2024
2023
£
£
Interest income
Interest on bank deposits
4,889
Other interest income
13,512
Total income
18,401
2024
2023
Investment income includes the following:
£
£
Interest on financial assets not measured at fair value through profit or loss
4,889
MANUFACTURING SERVICE SOLUTIONS LIMITED
NOTES TO THE FINANCIAL STATEMENTS (CONTINUED)
FOR THE YEAR ENDED 31 DECEMBER 2024
- 18 -
7
Interest payable and similar expenses
2024
2023
£
£
Interest on financial liabilities measured at amortised cost:
Interest on bank overdrafts and loans
-
26,933
Other finance costs:
Interest on finance leases and hire purchase contracts
9,773
5,594
9,773
32,527
8
Taxation
2024
2023
£
£
Current tax
UK corporation tax on profits for the current period
80,767
309,036
Group tax relief
16,234
Total current tax
97,001
309,036
Deferred tax
Origination and reversal of timing differences
32,350
(7,873)
Total tax charge
129,351
301,163
The actual charge for the year can be reconciled to the expected charge for the year based on the profit or loss and the standard rate of tax as follows:
2024
2023
£
£
Profit before taxation
1,020,135
2,113,956
Expected tax charge based on the standard rate of corporation tax in the UK of 25.00% (2023: 25.00%)
255,034
528,489
Tax effect of utilisation of tax losses not previously recognised
(93,942)
Effect of change in corporation tax rate
(19,438)
Depreciation on assets not qualifying for tax allowances
1,097
1,097
Research and development tax credit
(126,780)
(124,131)
Deferred tax adjustments in respect of prior years
9,088
Taxation charge for the year
129,351
301,163
MANUFACTURING SERVICE SOLUTIONS LIMITED
NOTES TO THE FINANCIAL STATEMENTS (CONTINUED)
FOR THE YEAR ENDED 31 DECEMBER 2024
- 19 -
9
Fixed asset investments
2024
2023
Notes
£
£
Investments in subsidiaries
10
100
100
10
Subsidiaries
Details of the company's subsidiaries at 31 December 2024 are as follows:
Name of undertaking
Registered office
Class of
% Held
shares held
Direct
MSS Lasers Limited
UK
100
100.00
11
Tangible fixed assets
Leasehold improvements
Plant and equipment
Fixtures and fittings
Motor vehicles
Total
£
£
£
£
£
Cost
At 1 January 2024
140,824
99,999
199,904
425,964
866,691
Additions
255,970
255,970
Disposals
(143,261)
(143,261)
At 31 December 2024
140,824
99,999
199,904
538,673
979,400
Depreciation and impairment
At 1 January 2024
68,707
64,883
179,460
257,467
570,517
Depreciation charged in the year
6,907
14,414
9,449
99,418
130,188
Eliminated in respect of disposals
(111,946)
(111,946)
At 31 December 2024
75,614
79,297
188,909
244,939
588,759
Carrying amount
At 31 December 2024
65,210
20,702
10,995
293,734
390,641
At 31 December 2023
72,117
35,116
20,443
168,497
296,173
Included within tangible fixed assets are assets held under hire purchase with a net book value of £192,702 (2023 - £34,319).
MANUFACTURING SERVICE SOLUTIONS LIMITED
NOTES TO THE FINANCIAL STATEMENTS (CONTINUED)
FOR THE YEAR ENDED 31 DECEMBER 2024
- 20 -
12
Stocks
2024
2023
£
£
Raw materials and consumables
907,058
926,886
Finished goods and goods for resale
2,301,846
2,002,679
3,208,904
2,929,565
Stock recognised in cost of sales during the year as an expense was £7,040,206 (2023 - £8,654,868).
13
Debtors
2024
2023
Amounts falling due within one year:
£
£
Trade debtors
1,654,185
1,897,267
Amounts owed by group undertakings
372,815
Other debtors
2,425,807
106,765
Prepayments and accrued income
84,245
48,170
4,164,237
2,425,017
14
Creditors: amounts falling due within one year
2024
2023
Notes
£
£
Obligations under hire purchase contracts
16
46,328
116,274
Trade creditors
1,457,051
1,738,896
Amounts owed to group undertakings
163,877
6,991
Corporation tax
80,767
309,036
Other taxation and social security
177,820
94,183
Other creditors
1,094,481
20,112
Accruals and deferred income
273,389
234,859
3,293,713
2,520,351
15
Creditors: amounts falling due after more than one year
2024
2023
Notes
£
£
Obligations under hire purchase contracts
16
103,694
3,392
MANUFACTURING SERVICE SOLUTIONS LIMITED
NOTES TO THE FINANCIAL STATEMENTS (CONTINUED)
FOR THE YEAR ENDED 31 DECEMBER 2024
- 21 -
16
Hire purchase obligations
2024
2023
Future minimum hire purchase obligations
£
£
Within one year
46,328
116,274
In two to five years
103,694
3,392
150,022
119,666
The hire purchase obligations are repayable monthly over period ranging from 2 to 4 years at interest rates between 5% and 6% per annum.
Hire purchase contracts of £150,022 (2023 - £119,666) are secured debts included within creditors. Obligations under hire purchase contracts are secured on the assets to which they relate.
17
Deferred taxation
The following are the major deferred tax liabilities and assets recognised by the company and movements thereon:
Liabilities
Liabilities
2024
2023
Balances:
£
£
Accelerated capital allowances
53,255
20,906
2024
Movements in the year:
£
Liability at 1 January 2024
20,906
Charge to profit or loss
32,349
Liability at 31 December 2024
53,255
The deferred tax liability set out above is expected to reverse within [12 months] and relates to accelerated capital allowances that are expected to mature within the same period.
18
Retirement benefit schemes
2024
2023
Defined contribution schemes
£
£
Charge to profit or loss in respect of defined contribution schemes
100,902
76,264
The company operates a defined contribution pension scheme for all qualifying employees. The assets of the scheme are held separately from those of the company in an independently administered fund.
MANUFACTURING SERVICE SOLUTIONS LIMITED
NOTES TO THE FINANCIAL STATEMENTS (CONTINUED)
FOR THE YEAR ENDED 31 DECEMBER 2024
- 22 -
19
Share capital
2024
2023
2024
2023
Ordinary share capital
Number
Number
£
£
Issued and fully paid
Ordinary of £1 each
1
1
1
1
Each share is entitled to one vote in any circumstance, is entitled to dividend payments or any other distribution and is entitled to participate in a distribution arising from winding up of the company.
20
Reserves
Called up share capital
This represents the nominal value of shares that have been issued.
Retained Earnings
This includes all current and prior period retained profits and losses.
21
Profit and loss reserves
2024
2023
as restated
£
£
At the beginning of the year
4,650,453
2,837,660
Adjusted balance
4,650,453
2,837,660
Profit for the year
890,784
1,812,793
At the end of the year
5,541,237
4,650,453
22
Related party transactions
Remuneration of key management personnel
The remuneration of key management personnel is as follows.
2024
2023
£
£
Aggregate compensation
972,813
931,417
Transactions with related parties
During the year the company entered into the following transactions with related parties:
Sales
Sales
2024
2023
£
£
Other related parties - under common control
5,357,061
7,254,734
MANUFACTURING SERVICE SOLUTIONS LIMITED
NOTES TO THE FINANCIAL STATEMENTS (CONTINUED)
FOR THE YEAR ENDED 31 DECEMBER 2024
22
Related party transactions
(Continued)
- 23 -
Rent
Management Charges
2024
2023
2024
2023
£
£
£
£
Entities with control, joint control or significant influence over the company
63,750
225,000
-
-
Other related parties
191,250
-
720,000
720,000
2024
2023
Amounts due to related parties
£
£
Entities over which the entity has control, joint control or significant influence
1,254,271
6,991
The following amounts were outstanding at the reporting end date:
2024
2023
Amounts due from related parties
£
£
Entities over which the entity has control, joint control or significant influence
-
372,815
Other related parties
613,026
156,522
23
Ultimate controlling party
The company's ultimate controlling party is Gonlll International Holdings Limited, a company incorporated in England (formerly known as MSS Group International Holdings Limited).
24
Directors' transactions
Loans
% Rate
Opening balance
Amounts advanced
Closing balance
£
£
£
Loan
2.25
-
2,422,220
2,422,220
-
2,422,220
2,422,220
Interest was charged at the official rate and the loan is repayable on demand.
MANUFACTURING SERVICE SOLUTIONS LIMITED
NOTES TO THE FINANCIAL STATEMENTS (CONTINUED)
FOR THE YEAR ENDED 31 DECEMBER 2024
- 24 -
25
Cash generated from operations
2024
2023
£
£
Profit after taxation
890,784
1,812,793
Adjustments for:
Taxation charged
129,351
301,163
Finance costs
9,773
32,527
Investment income
(18,401)
Gain on disposal of tangible fixed assets
(42,133)
(16,926)
Depreciation and impairment of tangible fixed assets
130,188
125,346
Movements in working capital:
Increase in stocks
(279,339)
(532,273)
Decrease/(increase) in debtors
683,000
(203,571)
Increase/(decrease) in creditors
1,071,577
(338,703)
Cash generated from operations
2,574,800
1,180,356
26
Analysis of changes in net funds
1 January 2024
Cash flows
31 December 2024
£
£
£
Cash at bank and in hand
1,544,248
(316,230)
1,228,018
Lease liabilities
(119,666)
(30,356)
(150,022)
1,424,582
(346,586)
1,077,996
27
Prior period adjustment
The prior year adjustment relates to the following:
- reclassify £720,000 of management charges from administration expenses to other operating income.
Reconciliation of changes in equity
The prior period adjustments do not give rise to any effect upon equity.
Reconciliation of changes in profit for the previous financial period
2023
£
Total adjustments
-
Profit as previously reported
1,812,793
Profit as adjusted
1,812,793
2024-12-312024-01-01falsefalsefalseCCH SoftwareCCH Accounts Production 2025.200Mr CA Gonzalez-LeeAC J BongaertsK Wyckmans47459982024-01-012024-12-314745998bus:Director22024-01-012024-12-314745998bus:Director32024-01-012024-12-314745998bus:Director12024-01-012024-12-314745998bus:RegisteredOffice2024-01-012024-12-3147459982024-12-3147459982023-01-012023-12-314745998core:RetainedEarningsAccumulatedLosses2023-12-314745998core:RetainedEarningsAccumulatedLosses2022-12-314745998core:ShareCapital2024-12-314745998core:ShareCapital2023-12-314745998core:RetainedEarningsAccumulatedLosses2024-12-314745998core:RetainedEarningsAccumulatedLosses2023-12-3147459982023-12-314745998core:ShareCapitalOrdinaryShareClass12024-12-314745998core:ShareCapitalOrdinaryShareClass12023-12-314745998core:LeaseholdImprovements2024-12-314745998core:PlantMachinery2024-12-314745998core:FurnitureFittings2024-12-314745998core:MotorVehicles2024-12-314745998core:LeaseholdImprovements2023-12-314745998core:PlantMachinery2023-12-314745998core:FurnitureFittings2023-12-314745998core:MotorVehicles2023-12-31474599812024-01-012024-12-31474599812023-01-012023-12-3147459982023-12-3147459982022-12-314745998core:LeaseholdImprovements2024-01-012024-12-314745998core:PlantMachinery2024-01-012024-12-314745998core:FurnitureFittings2024-01-012024-12-314745998core:MotorVehicles2024-01-012024-12-314745998core:UKTax2024-01-012024-12-314745998core:UKTax2023-01-012023-12-314745998core:Non-currentFinancialInstruments2024-12-314745998core:Non-currentFinancialInstruments2023-12-314745998core:Subsidiary12024-01-012024-12-314745998core:Subsidiary112024-01-012024-12-314745998core:LeaseholdImprovements2023-12-314745998core:PlantMachinery2023-12-314745998core:FurnitureFittings2023-12-314745998core:MotorVehicles2023-12-314745998core:CurrentFinancialInstruments2024-12-314745998core:CurrentFinancialInstruments2023-12-314745998core:WithinOneYear2024-12-314745998core:WithinOneYear2023-12-314745998core:BetweenTwoFiveYears2024-12-314745998core:BetweenTwoFiveYears2023-12-314745998bus:OrdinaryShareClass12024-01-012024-12-314745998bus:OrdinaryShareClass12024-12-314745998bus:OrdinaryShareClass12023-12-314745998core:OtherRelatedPartiescore:SaleOrPurchaseGoods2024-01-012024-12-314745998core:OtherRelatedPartiescore:SaleOrPurchaseGoods2023-01-012023-12-314745998bus:PrivateLimitedCompanyLtd2024-01-012024-12-314745998bus:FRS1022024-01-012024-12-314745998bus:Audited2024-01-012024-12-314745998bus:FullAccounts2024-01-012024-12-31xbrli:purexbrli:sharesiso4217:GBP