| REGISTERED NUMBER: |
| R.S. BRUCE (METALS & MACHINERY) LTD |
| UNAUDITED FINANCIAL STATEMENTS |
| FOR THE YEAR ENDED |
| 31 MARCH 2025 |
| REGISTERED NUMBER: |
| R.S. BRUCE (METALS & MACHINERY) LTD |
| UNAUDITED FINANCIAL STATEMENTS |
| FOR THE YEAR ENDED |
| 31 MARCH 2025 |
| R.S. BRUCE (METALS & MACHINERY) LTD (REGISTERED NUMBER: 01916945) |
| CONTENTS OF THE FINANCIAL STATEMENTS |
| FOR THE YEAR ENDED 31 MARCH 2025 |
| Page |
| Company Information | 1 |
| Statement of Financial Position | 2 |
| Notes to the Financial Statements | 4 |
| R.S. BRUCE (METALS & MACHINERY) LTD |
| COMPANY INFORMATION |
| FOR THE YEAR ENDED 31 MARCH 2025 |
| DIRECTORS: |
| REGISTERED OFFICE: |
| REGISTERED NUMBER: |
| R.S. BRUCE (METALS & MACHINERY) LTD (REGISTERED NUMBER: 01916945) |
| STATEMENT OF FINANCIAL POSITION |
| 31 MARCH 2025 |
| 2025 | 2024 |
| Notes | £ | £ | £ | £ |
| FIXED ASSETS |
| Tangible assets | 4 |
| CURRENT ASSETS |
| Stocks |
| Debtors | 5 |
| Cash at bank and in hand |
| CREDITORS |
| Amounts falling due within one year | 6 |
| NET CURRENT ASSETS |
| TOTAL ASSETS LESS CURRENT LIABILITIES |
| CREDITORS |
| Amounts falling due after more than one year |
7 |
( |
) |
( |
) |
| PROVISIONS FOR LIABILITIES | ( |
) | ( |
) |
| NET ASSETS |
| CAPITAL AND RESERVES |
| Called up share capital |
| Capital redemption reserve |
| Retained earnings |
| SHAREHOLDERS' FUNDS |
| The directors acknowledge their responsibilities for: |
| (a) | ensuring that the company keeps accounting records which comply with Sections 386 and 387 of the Companies Act 2006 and |
| (b) | preparing financial statements which give a true and fair view of the state of affairs of the company as at the end of each financial year and of its profit or loss for each financial year in accordance with the requirements of Sections 394 and 395 and which otherwise comply with the requirements of the Companies Act 2006 relating to financial statements, so far as applicable to the company. |
| R.S. BRUCE (METALS & MACHINERY) LTD (REGISTERED NUMBER: 01916945) |
| STATEMENT OF FINANCIAL POSITION - continued |
| 31 MARCH 2025 |
| The financial statements were approved by the Board of Directors and authorised for issue on |
| R.S. BRUCE (METALS & MACHINERY) LTD (REGISTERED NUMBER: 01916945) |
| NOTES TO THE FINANCIAL STATEMENTS |
| FOR THE YEAR ENDED 31 MARCH 2025 |
| 1. | STATUTORY INFORMATION |
| R.S. Bruce (Metals & Machinery) Ltd is a |
| 2. | ACCOUNTING POLICIES |
| Basis of preparing the financial statements |
| Turnover |
| Turnover is measured at the fair value of the consideration received or receivable, excluding discounts, rebates, value added tax and other sales taxes. |
| Tangible fixed assets |
| Land and buildings | - |
| Plant and machinery etc | - |
| Stocks |
| Stocks and work in progress are valued at the lower of cost and net realisable value, after making due allowance for obsolete and slow moving items. |
| Cost is calculated using the first-in, first-out method and includes all purchase, transport, and handling costs in bringing stocks to their present location and condition. |
| Taxation |
| Taxation for the year comprises current and deferred tax. Tax is recognised in the Income Statement, except to the extent that it relates to items recognised in other comprehensive income or directly in equity. |
| Current or deferred taxation assets and liabilities are not discounted. |
| Current tax is recognised at the amount of tax payable using the tax rates and laws that have been enacted or substantively enacted by the statement of financial position date. |
| Deferred tax |
| Deferred tax is recognised in respect of all timing differences that have originated but not reversed at the statement of financial position date. |
| Timing differences arise from the inclusion of income and expenses in tax assessments in periods different from those in which they are recognised in financial statements. Deferred tax is measured using tax rates and laws that have been enacted or substantively enacted by the year end and that are expected to apply to the reversal of the timing difference. |
| Unrelieved tax losses and other deferred tax assets are recognised only to the extent that it is probable that they will be recovered against the reversal of deferred tax liabilities or other future taxable profits. |
| Foreign currencies |
| Assets and liabilities in foreign currencies are translated into sterling at the rates of exchange ruling at the statement of financial position date. Transactions in foreign currencies are translated into sterling at the rate of exchange ruling at the date of transaction. Exchange differences are taken into account in arriving at the operating result. |
| R.S. BRUCE (METALS & MACHINERY) LTD (REGISTERED NUMBER: 01916945) |
| NOTES TO THE FINANCIAL STATEMENTS - continued |
| FOR THE YEAR ENDED 31 MARCH 2025 |
| 2. | ACCOUNTING POLICIES - continued |
| Hire purchase and leasing commitments |
| Assets obtained under hire purchase contracts or finance leases are capitalised in the balance sheet. Those held under hire purchase contracts are depreciated over their estimated useful lives. Those held under finance leases are depreciated over their estimated useful lives or the lease term, whichever is the shorter. |
| The interest element of these obligations is charged to profit or loss over the relevant period. The capital element of the future payments is treated as a liability. |
| Rentals paid under operating leases are charged to profit or loss on a straight line basis over the period of the lease. |
| Pension costs and other post-retirement benefits |
| The company operates a defined contribution pension scheme. Contributions payable to the company's pension scheme are charged to profit or loss in the period to which they relate. |
| 3. | EMPLOYEES AND DIRECTORS |
| The average number of employees during the year was |
| 4. | TANGIBLE FIXED ASSETS |
| Fixtures |
| Freehold | Plant and | and |
| property | machinery | fittings |
| £ | £ | £ |
| COST |
| At 1 April 2024 |
| Additions |
| Disposals | ( |
) |
| At 31 March 2025 |
| DEPRECIATION |
| At 1 April 2024 |
| Charge for year |
| Eliminated on disposal | ( |
) |
| At 31 March 2025 |
| NET BOOK VALUE |
| At 31 March 2025 |
| At 31 March 2024 |
| R.S. BRUCE (METALS & MACHINERY) LTD (REGISTERED NUMBER: 01916945) |
| NOTES TO THE FINANCIAL STATEMENTS - continued |
| FOR THE YEAR ENDED 31 MARCH 2025 |
| 4. | TANGIBLE FIXED ASSETS - continued |
| Motor | Computer |
| vehicles | equipment | Totals |
| £ | £ | £ |
| COST |
| At 1 April 2024 |
| Additions |
| Disposals | ( |
) | ( |
) |
| At 31 March 2025 |
| DEPRECIATION |
| At 1 April 2024 |
| Charge for year |
| Eliminated on disposal | ( |
) | ( |
) |
| At 31 March 2025 |
| NET BOOK VALUE |
| At 31 March 2025 |
| At 31 March 2024 |
| Fixed assets, included in the above, which are held under hire purchase contracts are as follows: |
| Motor |
| vehicles |
| £ |
| COST |
| At 1 April 2024 |
| Additions |
| Disposals | ( |
) |
| At 31 March 2025 |
| DEPRECIATION |
| At 1 April 2024 |
| Charge for year |
| Eliminated on disposal | ( |
) |
| At 31 March 2025 |
| NET BOOK VALUE |
| At 31 March 2025 |
| At 31 March 2024 |
| R.S. BRUCE (METALS & MACHINERY) LTD (REGISTERED NUMBER: 01916945) |
| NOTES TO THE FINANCIAL STATEMENTS - continued |
| FOR THE YEAR ENDED 31 MARCH 2025 |
| 5. | DEBTORS: AMOUNTS FALLING DUE WITHIN ONE YEAR |
| 2025 | 2024 |
| £ | £ |
| Trade debtors |
| Other debtors |
| 6. | CREDITORS: AMOUNTS FALLING DUE WITHIN ONE YEAR |
| 2025 | 2024 |
| £ | £ |
| Hire purchase contracts |
| Trade creditors |
| Taxation and social security |
| Other creditors |
| 7. | CREDITORS: AMOUNTS FALLING DUE AFTER MORE THAN ONE YEAR |
| 2025 | 2024 |
| £ | £ |
| Hire purchase contracts |
| 8. | SECURED DEBTS |
| The following secured debts are included within creditors: |
| 2025 | 2024 |
| £ | £ |
| Hire purchase contracts | 72,486 | 17,540 |