|
Registered number: 01566607
BURLEY FABRICATIONS LIMITED
UNAUDITED
FINANCIAL STATEMENTS
INFORMATION FOR FILING WITH THE REGISTRAR
FOR THE YEAR ENDED 31 MAY 2025
|
|
BURLEY FABRICATIONS LIMITED
ACCOUNTANT'S REPORT TO THE BOARD OF DIRECTORS ON THE PREPARATION OF THE UNAUDITED STATUTORY FINANCIAL STATEMENTS OF BURLEY FABRICATIONS LIMITED
FOR THE YEAR ENDED 31 MAY 2025
You consider that the Company is exempt from an audit for the year ended 31 May 2025. You have acknowledged, on the Balance sheet, your responsibilities for ensuring that the Company keeps adequate accounting records which comply with section 386 of the Companies Act 2006, and for preparing the financial statements which give a true and fair view of the state of affairs of the Company and of its profit or loss for the financial year.
In accordance with your instructions, I have prepared the financial statements on pages 10 from the accounting records of the Company and on the basis of information and explanations you have given to me.
I have not carried out an audit or any other review, and consequently I do not express any opinion on these financial statements.
J D Pennington
Accountant
Granton Parkway Suite
Parkway Close
Sheffield
South Yorkshire
S9 4WJ
11 November 2025
|
|
BURLEY FABRICATIONS LIMITED
REGISTERED NUMBER: 01566607
BALANCE SHEET
AS AT 31 MAY 2025
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Debtors: amounts falling due within one year
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Creditors: amounts falling due within one year
|
|
|
|
|
|
|
|
|
|
|
|
|
Total assets less current liabilities
|
|
|
|
|
|
Creditors: amounts falling due after more than one year
|
|
|
|
|
|
Provisions for liabilities
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The directors consider that the Company is entitled to exemption from audit under section 477 of the Companies Act 2006 and members have not required the Company to obtain an audit for the year in question in accordance with section 476 of the Companies Act 2006.
The directors acknowledge their responsibilities for complying with the requirements of the Companies Act 2006 with respect to accounting records and the preparation of financial statements.
The financial statements have been prepared in accordance with the provisions applicable to companies subject to the small companies regime and in accordance with the provisions of FRS 102 Section 1A - small entities.
The financial statements have been delivered in accordance with the provisions applicable to companies subject to the small companies regime.
|
|
BURLEY FABRICATIONS LIMITED
REGISTERED NUMBER: 01566607
BALANCE SHEET (CONTINUED)
AS AT 31 MAY 2025
The Company has opted not to file the statement of comprehensive income in accordance with provisions applicable to companies subject to the small companies' regime.
The financial statements were approved and authorised for issue by the board and were signed on its behalf on 11 November 2025.
The notes on pages 4 to 10 form part of these financial statements.
|
|
BURLEY FABRICATIONS LIMITED
NOTES TO THE FINANCIAL STATEMENTS
FOR THE YEAR ENDED 31 MAY 2025
Burley Fabrications Limited is a private company limited by shares incorporated in England & Wales. The registered office is Unit 10, 35 Catley Road, Darnall, Sheffield, S9 5JF, England.
2.Accounting policies
|
|
|
Basis of preparation of financial statements
|
The financial statements have been prepared under the historical cost convention unless otherwise specified within these accounting policies and in accordance with FRS 102 'The Financial Reporting Standard applicable in the UK and the Republic of Ireland' and the requirements of the Companies Act 2006. The disclosure requirements of Section 1A of FRS 102 have been applied other than where additional disclosure is required to show a true and fair view.
The following principal accounting policies have been applied:
Revenue is recognised to the extent that it is probable that the economic benefits will flow to the Company and the revenue can be reliably measured. Revenue is measured as the fair value of the consideration received or receivable, excluding discounts, rebates, value added tax and other sales taxes. The following criteria must also be met before revenue is recognised:
Sale of goods
Revenue from the sale of goods is recognised when all of the following conditions are satisfied:
∙the Company has transferred the significant risks and rewards of ownership to the buyer;
∙the Company retains neither continuing managerial involvement to the degree usually associated with ownership nor effective control over the goods sold;
∙the amount of revenue can be measured reliably;
∙it is probable that the Company will receive the consideration due under the transaction; and
∙the costs incurred or to be incurred in respect of the transaction can be measured reliably.
Rendering of services
Revenue from a contract to provide services is recognised in the period in which the services are provided in accordance with the stage of completion of the contract when all of the following conditions are satisfied:
∙the amount of revenue can be measured reliably;
∙it is probable that the Company will receive the consideration due under the contract;
∙the stage of completion of the contract at the end of the reporting period can be measured reliably; and
∙the costs incurred and the costs to complete the contract can be measured reliably.
|
|
|
Operating leases: the Company as lessee
|
Rentals paid under operating leases are charged to profit or loss on a straight-line basis over the lease term.
|
|
BURLEY FABRICATIONS LIMITED
NOTES TO THE FINANCIAL STATEMENTS
FOR THE YEAR ENDED 31 MAY 2025
2.Accounting policies (continued)
Interest income is recognised in profit or loss using the effective interest method.
Finance costs are charged to profit or loss over the term of the debt using the effective interest method so that the amount charged is at a constant rate on the carrying amount. Issue costs are initially recognised as a reduction in the proceeds of the associated capital instrument.
Defined contribution pension plan
The Company operates a defined contribution plan for its employees. A defined contribution plan is a pension plan under which the Company pays fixed contributions into a separate entity. Once the contributions have been paid the Company has no further payment obligations.
The contributions are recognised as an expense in profit or loss when they fall due. Amounts not paid are shown in accruals as a liability in the Balance sheet. The assets of the plan are held separately from the Company in independently administered funds.
|
|
|
Current and deferred taxation
|
The tax expense for the year comprises current and deferred tax. Tax is recognised in profit or loss except that a charge attributable to an item of income and expense recognised as other comprehensive income or to an item recognised directly in equity is also recognised in other comprehensive income or directly in equity respectively.
The current income tax charge is calculated on the basis of tax rates and laws that have been enacted or substantively enacted by the balance sheet date in the countries where the Company operates and generates income.
Deferred tax balances are recognised in respect of all timing differences that have originated but not reversed by the balance sheet date, except that:
∙The recognition of deferred tax assets is limited to the extent that it is probable that they will be recovered against the reversal of deferred tax liabilities or other future taxable profits; and
∙Any deferred tax balances are reversed if and when all conditions for retaining associated tax allowances have been met.
Deferred tax balances are not recognised in respect of permanent differences except in respect of business combinations, when deferred tax is recognised on the differences between the fair values of assets acquired and the future tax deductions available for them and the differences between the fair values of liabilities acquired and the amount that will be assessed for tax. Deferred tax is determined using tax rates and laws that have been enacted or substantively enacted by the balance sheet date.
|
|
BURLEY FABRICATIONS LIMITED
NOTES TO THE FINANCIAL STATEMENTS
FOR THE YEAR ENDED 31 MAY 2025
2.Accounting policies (continued)
Tangible fixed assets under the cost model are stated at historical cost less accumulated depreciation and any accumulated impairment losses. Historical cost includes expenditure that is directly attributable to bringing the asset to the location and condition necessary for it to be capable of operating in the manner intended by management.
Depreciation is charged so as to allocate the cost of assets less their residual value over their estimated useful lives, using the straight-line method.
Depreciation is provided on the following basis:
The assets' residual values, useful lives and depreciation methods are reviewed, and adjusted prospectively if appropriate, or if there is an indication of a significant change since the last reporting date.
Gains and losses on disposals are determined by comparing the proceeds with the carrying amount and are recognised in profit or loss.
Stocks are stated at the lower of cost and net realisable value, being the estimated selling price less costs to complete and sell. Cost is based on the cost of purchase on a first in, first out basis. Work in progress and finished goods include labour and attributable overheads.
At each balance sheet date, stocks are assessed for impairment. If stock is impaired, the carrying amount is reduced to its selling price less costs to complete and sell. The impairment loss is recognised immediately in profit or loss.
Short-term debtors are measured at transaction price, less any impairment. Loans receivable are measured initially at fair value, net of transaction costs, and are measured subsequently at amortised cost using the effective interest method, less any impairment.
|
|
|
Cash and cash equivalents
|
Cash is represented by cash in hand and deposits with financial institutions repayable without penalty on notice of not more than 24 hours. Cash equivalents are highly liquid investments that mature in no more than three months from the date of acquisition and that are readily convertible to known amounts of cash with insignificant risk of change in value.
Short-term creditors are measured at the transaction price. Other financial liabilities, including bank loans, are measured initially at fair value, net of transaction costs, and are measured subsequently at amortised cost using the effective interest method.
|
|
BURLEY FABRICATIONS LIMITED
NOTES TO THE FINANCIAL STATEMENTS
FOR THE YEAR ENDED 31 MAY 2025
2.Accounting policies (continued)
|
|
|
Provisions for liabilities
|
Provisions are recognised when an event has taken place that gives rise to a legal or constructive obligation, a transfer of economic benefits is probable and a reliable estimate can be made.
Provisions are measured as the best estimate of the amount required to settle the obligation, taking into account the related risks and uncertainties.
Increases in provisions are generally charged as an expense to profit or loss.
Equity dividends are recognised when they become legally payable. Interim equity dividends are recognised when paid. Final equity dividends are recognised when approved by the shareholders at an annual general meeting.
|
|
The average monthly number of employees, including directors, during the year was 12 (2024 - 15).
|
|
|
BURLEY FABRICATIONS LIMITED
NOTES TO THE FINANCIAL STATEMENTS
FOR THE YEAR ENDED 31 MAY 2025
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Charge for the year on owned assets
|
|
|
|
|
|
|
Charge for the year on financed assets
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Prepayments and accrued income
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BURLEY FABRICATIONS LIMITED
NOTES TO THE FINANCIAL STATEMENTS
FOR THE YEAR ENDED 31 MAY 2025
|
|
Cash and cash equivalents
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Creditors: Amounts falling due within one year
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Other taxation and social security
|
|
|
|
|
Obligations under finance lease and hire purchase contracts
|
|
|
|
|
|
|
|
|
|
Accruals and deferred income
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Creditors: Amounts falling due after more than one year
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Net obligations under finance leases and hire purchase contracts
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hire purchase and finance leases
|
|
|
Minimum lease payments under hire purchase fall due as follows:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BURLEY FABRICATIONS LIMITED
NOTES TO THE FINANCIAL STATEMENTS
FOR THE YEAR ENDED 31 MAY 2025
|
|
|
|
|
|
|
|
|
|
|
|
|
Charged to profit or loss
|
|
|
|
|
|
|
The provision for deferred taxation is made up as follows:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Accelerated capital allowances
|
|
|
|
|
|
|
|
The Company operates a defined contributions pension scheme. The assets of the scheme are held separately from those of the Company in an independently administered fund. The pension cost charge represents contributions payable by the Company to the fund and amounted to £2,700 (2024 - £4,058).
|