Registered number
10350145
DC Joinery (Midlands) Ltd
Filleted Accounts
31 August 2025
DC Joinery (Midlands) Ltd
Registered number: 10350145
Balance Sheet
as at 31 August 2025
Notes 2025 2024
£ £
Fixed assets
Tangible assets 3 1,272 1,297
Current assets
Debtors 4 2,752 2,762
Cash at bank and in hand 1,589 3,089
4,341 5,851
Creditors: amounts falling due within one year 5 (4,245) (4,366)
Net current assets 96 1,485
Net assets 1,368 2,782
Capital and reserves
Called up share capital 100 100
Profit and loss account 1,268 2,682
Shareholders' funds 1,368 2,782
The director is satisfied that the company is entitled to exemption from the requirement to obtain an audit under section 477 of the Companies Act 2006.
The members have not required the company to obtain an audit in accordance with section 476 of the Act.
The director acknowledges his responsibilities for complying with the requirements of the Companies Act 2006 with respect to accounting records and the preparation of accounts.
The accounts have been prepared and delivered in accordance with the special provisions applicable to companies subject to the small companies regime. The profit and loss account has not been delivered to the Registrar of Companies.
Mr D Confaloni
Director
Approved by the board on 4 December 2025
DC Joinery (Midlands) Ltd
Notes to the Accounts
for the year ended 31 August 2025
1 Accounting policies
Basis of preparation
The accounts have been prepared under the historical cost convention and in accordance with FRS 102, The Financial Reporting Standard applicable in the UK and Republic of Ireland (as applied to small entities by section 1A of the standard).
Turnover
Turnover is measured at the fair value of the consideration received or receivable, net of discounts and value added taxes. Turnover includes revenue earned from the sale of goods and from the rendering of services. Turnover from the sale of goods is recognised when the significant risks and rewards of ownership of the goods have transferred to the buyer. Turnover from the rendering of services is recognised by reference to the stage of completion of the contract. The stage of completion of a contract is measured by comparing the costs incurred for work performed to date to the total estimated contract costs.
Tangible fixed assets
Tangible fixed assets are measured at cost less accumulative depreciation and any accumulative impairment losses. Depreciation is provided on all tangible fixed assets, other than freehold land, at rates calculated to write off the cost, less estimated residual value, of each asset evenly over its expected useful life, as follows:
Plant and machinery over 5 years
Fixtures, fittings, tools and equipment over 5 years
Debtors
Short term debtors are measured at transaction price (which is usually the invoice price), less any impairment losses for bad and doubtful debts. Loans and other financial assets are initially recognised at transaction price including any transaction costs and subsequently measured at amortised cost determined using the effective interest method, less any impairment losses for bad and doubtful debts.
Creditors
Short term creditors are measured at transaction price (which is usually the invoice price). Loans and other financial liabilities are initially recognised at transaction price net of any transaction costs and subsequently measured at amortised cost determined using the effective interest method.
Taxation
A current tax liability is recognised for the tax payable on the taxable profit of the current and past periods. A current tax asset is recognised in respect of a tax loss that can be carried back to recover tax paid in a previous period. Deferred tax is recognised in respect of all timing differences between the recognition of income and expenses in the financial statements and their inclusion in tax assessments. Unrelieved tax losses and other deferred tax assets are recognised only to the extent that it is probable that they will be recovered against the reversal of deferred tax liabilities or other future taxable profits. Deferred tax is measured using the tax rates and laws that have been enacted or substantively enacted by the reporting date and that are expected to apply to the reversal of the timing difference, except for revalued land and investment property where the tax rate that applies to the sale of the asset is used. Current and deferred tax assets and liabilities are not discounted.
Provisions
Provisions (ie liabilities of uncertain timing or amount) are recognised when there is an obligation at the reporting date as a result of a past event, it is probable that economic benefit will be transferred to settle the obligation and the amount of the obligation can be estimated reliably.
2 Employees 2025 2024
Number Number
Average number of persons employed by the company 2 2
3 Tangible fixed assets
Plant and machinery etc Motor vehicles Total
£ £ £
Cost
At 1 September 2024 4,211 500 4,711
Additions 549 - 549
Disposals - (500) (500)
At 31 August 2025 4,760 - 4,760
Depreciation
At 1 September 2024 2,914 500 3,414
Charge for the year 574 - 574
On disposals - (500) (500)
At 31 August 2025 3,488 - 3,488
Net book value
At 31 August 2025 1,272 - 1,272
At 31 August 2024 1,297 - 1,297
4 Debtors 2025 2024
£ £
Trade debtors 350 420
Other debtors 2,402 2,342
2,752 2,762
5 Creditors: amounts falling due within one year 2025 2024
£ £
Trade creditors 2,419 949
Taxation and social security costs 613 1,522
Other creditors 1,213 1,895
4,245 4,366
6 Loans from directors
Description and conditions B/fwd Paid Repaid C/fwd
£ £ £ £
Mr D Confaloni
Directors Loan Account 466 (16,463) 16,181 184
Mrs C N Confaloni
Directors Loan Account 465 (16,462) 16,180 183
931 (32,925) 32,361 367
7 Controlling party
The company is controlled by the company shareholders Mr D Confaloni and Mrs C N Confaloni by virtue of their shareholding.
8 Other information
DC Joinery (Midlands) Ltd is a private company limited by shares and incorporated in England. Its registered office is:
12 Granary Wharf Business Park
Wetmore Road
Burton on Trent
Staffordshire
DE14 1DU
DC Joinery (Midlands) Ltd 10350145 false 2024-09-01 2025-08-31 2025-08-31 VT Final Accounts April 2025 Mr D Confaloni No description of principal activity 10350145 2023-09-01 2024-08-31 10350145 core:WithinOneYear 2024-08-31 10350145 core:ShareCapital 2024-08-31 10350145 core:RetainedEarningsAccumulatedLosses 2024-08-31 10350145 2024-09-01 2025-08-31 10350145 bus:PrivateLimitedCompanyLtd 2024-09-01 2025-08-31 10350145 bus:AuditExemptWithAccountantsReport 2024-09-01 2025-08-31 10350145 bus:Director40 2024-09-01 2025-08-31 10350145 1 2024-09-01 2025-08-31 10350145 2 2024-09-01 2025-08-31 10350145 core:PlantMachinery 2024-09-01 2025-08-31 10350145 core:Vehicles 2024-09-01 2025-08-31 10350145 bus:Director1 2024-09-01 2025-08-31 10350145 bus:Director1 1 2024-09-01 2025-08-31 10350145 bus:Director2 2024-09-01 2025-08-31 10350145 bus:Director2 1 2024-09-01 2025-08-31 10350145 countries:England 2024-09-01 2025-08-31 10350145 bus:FRS102 2024-09-01 2025-08-31 10350145 bus:FilletedAccounts 2024-09-01 2025-08-31 10350145 2025-08-31 10350145 core:WithinOneYear 2025-08-31 10350145 core:ShareCapital 2025-08-31 10350145 core:RetainedEarningsAccumulatedLosses 2025-08-31 10350145 core:PlantMachinery 2025-08-31 10350145 core:Vehicles 2025-08-31 10350145 bus:Director1 1 2025-08-31 10350145 bus:Director2 1 2025-08-31 10350145 2024-08-31 10350145 core:PlantMachinery 2024-08-31 10350145 core:Vehicles 2024-08-31 10350145 bus:Director1 1 2024-08-31 10350145 bus:Director2 1 2024-08-31 iso4217:GBP xbrli:pure