Registration number: 04090835

Dtec Fabrications Limited

Company Information

Directors

Mr D R Clorley Mr H B Milligan

Registered office

Churchills Yard Whieldon Road Stoke On Trent Staffordshire ST4 4HP

Dtec Fabrications Limited

(Registration number: 04090835)
Balance Sheet as at 31 December 2025

	Note	2025 £	2024 £
Fixed assets
Tangible assets	4	251,096	217,229
Current assets
Stocks	5	27,150	40,566
Debtors	6	143,567	50,596
Cash at bank and in hand		583,012	553,031
		753,729	644,193
Creditors: Amounts falling due within one year	7	(250,471)	(237,123)
Net current assets		503,258	407,070
Total assets less current liabilities		754,354	624,299
Provisions for liabilities		(20,095)	(10,561)
Net assets		734,259	613,738
Capital and reserves
Called up share capital	8	200	200
Retained earnings		734,059	613,538
Shareholders' funds		734,259	613,738

For the financial year ending 31 December 2025 the company was entitled to exemption from audit under section 477 of the Companies Act 2006 relating to small companies.

Directors' responsibilities:

•	The members have not required the company to obtain an audit of its accounts for the year in question in accordance with section 476; and
•	The directors acknowledge their responsibilities for complying with the requirements of the Act with respect to accounting records and the preparation of accounts.

These financial statements have been prepared and delivered in accordance with the provisions applicable to companies subject to the small companies regime. As permitted by section 444 (5A) of the Companies Act 2006, the directors have not delivered to the registrar a copy of the Profit and Loss Account.

Approved and authorised by the Board on 25 March 2025 and signed on its behalf by:
 

Dtec Fabrications Limited

(Registration number: 04090835)
Balance Sheet as at 31 December 2025

......................................... Mr D R Clorley Director

......................................... Mr H B Milligan Director

Dtec Fabrications Limited

Notes to the Unaudited Financial Statements for the Year Ended 31 December 2025

1	General information

The company is a private company limited by share capital, incorporated in England .

The address of its registered office is:
Churchills Yard
Whieldon Road
Stoke On Trent
Staffordshire
ST4 4HP

These financial statements were authorised for issue by the Board on 25 March 2025.

2	Accounting policies

Summary of significant accounting policies and key accounting estimates

The principal accounting policies applied in the preparation of these financial statements are set out below. These policies have been consistently applied to all the years presented, unless otherwise stated.

Statement of compliance

These financial statements have been prepared in accordance with Financial Reporting Standard 102 Section 1A smaller entities - 'The Financial Reporting Standard applicable in the United Kingdom and Republic of Ireland' and the Companies Act 2006 (as applicable to companies subject to the small companies' regime).

Basis of preparation

These financial statements have been prepared using the historical cost convention except that as disclosed in the accounting policies certain items are shown at fair value.

Going concern

After making enquiries, the Directors have a reasonable expectation that the Company has adequate resources to continue in operational existence for the foreseeable future. The Company therefore continues to adopt the going concern basis in preparing it's financial statements. The Company is considered to be well positioned given the current environment with no impact on the going concern basis of the financial statements.

Revenue recognition

Turnover comprises the fair value of the consideration received or receivable for the sale of goods and provision of services in the ordinary course of the company’s activities. Turnover is shown net of sales/value added tax, returns, rebates and discounts.

The company recognises revenue when:
The amount of revenue can be reliably measured;
it is probable that future economic benefits will flow to the entity;
and specific criteria have been met for each of the company's activities.

Dtec Fabrications Limited

Notes to the Unaudited Financial Statements for the Year Ended 31 December 2025

Foreign currency transactions and balances

Transactions in foreign currencies are initially recorded at the functional currency rate prevailing at the date of the transaction. Monetary assets and liabilities denominated in foreign currencies are retranslated into the respective functional currency of the entity at the rates prevailing on the reporting period date. Non-monetary items carried at fair value that are denominated in foreign currencies are retranslated at the rate on the date when the fair value is re-measured.

Non-monetary items measured in terms of historical cost in a foreign currency are not retranslated.

Tax

The tax expense for the period comprises current and deferred tax. Tax is recognised in profit or loss, except that a change attributable to an item of income or expense recognised as other comprehensive income is also recognised directly in other comprehensive income.

The current income tax charge is calculated on the basis of tax rates and laws that have been enacted or substantively enacted by the reporting date in the countries where the company operates and generates taxable income.

Deferred income tax is recognised on temporary differences arising between the tax bases of assets and liabilities and their carrying amounts in the financial statements and on unused tax losses or tax credits in the company. Deferred income tax is determined using tax rates and laws that have been enacted or substantively enacted by the reporting date.

Tangible assets

Tangible assets are stated in the balance sheet at cost, less any subsequent accumulated depreciation and subsequent accumulated impairment losses.

The cost of tangible assets includes directly attributable incremental costs incurred in their acquisition and installation.

Depreciation

Depreciation is charged so as to write off the cost of assets, other than land and properties under construction over their estimated useful lives, as follows:

Asset class	Depreciation method and rate
Land and Buildings	Straight line over 50 years (buildings)
Plant and Machinery	25% reducing balance
Fixtures and fittings	15% reducing balance
Motor vehicles	25% reducing balance

Cash and cash equivalents

Cash and cash equivalents comprise cash on hand and call deposits, and other short-term highly liquid investments that are readily convertible to a known amount of cash and are subject to an insignificant risk of change in value.

Dtec Fabrications Limited

Notes to the Unaudited Financial Statements for the Year Ended 31 December 2025

Trade debtors

Trade debtors are amounts due from customers for merchandise sold or services performed in the ordinary course of business.

Trade debtors are recognised initially at the transaction price. They are subsequently measured at amortised cost using the effective interest method, less provision for impairment. A provision for the impairment of trade debtors is established when there is objective evidence that the company will not be able to collect all amounts due according to the original terms of the receivables.

Stocks

Stocks are stated at the lower of cost and estimated selling price less costs to complete and sell. Cost is determined using the first-in, first-out (FIFO) method.

The cost of finished goods and work in progress comprises direct materials and, where applicable, direct labour costs and those overheads that have been incurred in bringing the inventories to their present location and condition. At each reporting date, stocks are assessed for impairment. If stocks are impaired, the carrying amount is reduced to its selling price less costs to complete and sell; the impairment loss is recognised immediately in profit or loss.

Trade creditors

Trade creditors are obligations to pay for goods or services that have been acquired in the ordinary course of business from suppliers. Accounts payable are classified as current liabilities if the company does not have an unconditional right, at the end of the reporting period, to defer settlement of the creditor for at least twelve months after the reporting date. If there is an unconditional right to defer settlement for at least twelve months after the reporting date, they are presented as non-current liabilities.

Trade creditors are recognised initially at the transaction price and subsequently measured at amortised cost using the effective interest method.

Provisions

Provisions are made where an event has taken place that gives the Company a legal or constructive obligation that probably requires settlement by a transfer of economic benefit, and a reliable estimate can be made of the amount of the obligation.

Provisions are charged as an expense to profit or loss in the year that the Company becomes aware of the obligation, and are measured at the best estimate at the balance sheet date of the expenditure required to settle the obligation, taking into account relevant risks and uncertainties.

When payments are eventually made, they are charged to the provision carried in the Balance sheet.

Share capital

Ordinary shares are classified as equity. Equity instruments are measured at the fair value of the cash or other resources received or receivable, net of the direct costs of issuing the equity instruments. If payment is deferred and the time value of money is material, the initial measurement is on a present value basis. The share capital disclosed on the balance sheet is allotted, called up and fully paid.

Dividends

Dividend distribution to the company’s shareholders is recognised as a liability in the financial statements in the reporting period in which the dividends are declared.

Dtec Fabrications Limited

Notes to the Unaudited Financial Statements for the Year Ended 31 December 2025

Defined contribution pension obligation

A defined contribution plan is a pension plan under which fixed contributions are paid into a pension fund and the company has no legal or constructive obligation to pay further contributions even if the fund does not hold sufficient assets to pay all employees the benefits relating to employee service in the current and prior periods.

Contributions to defined contribution plans are recognised as employee benefit expense when they are due. If contribution payments exceed the contribution due for service, the excess is recognised as a prepayment.

Financial instruments

Classification
The Company only enters into basic financial instrument transactions that result in the recognition of financial assets and liabilities like trade and other debtors and creditors, loans from banks and other third parties, loans to related parties and investments in ordinary shares.

 Recognition and measurement
Debt instruments (other than those wholly repayable or receivable within one year), including loans and other accounts receivable and payable, are initially measured at present value of the future cash flows and subsequently at amortised cost using the effective interest method. Debt instruments that are payable or receivable within one year, typically trade debtors and creditors, are measured, initially and subsequently, at the undiscounted amount of the cash or other consideration expected to be paid or received. However, if the arrangements of a snort-term instrument constitute a financing transaction, like the payment of a trade debt deferred beyond normal business terms or in case of an out-right short-term loan that is not at market rate, the financial asset or liability is measured, initially at the present value of future cash flows discounted at a market rate of interest for a similar debt instrument and subsequently at amortised cost, unless it qualifies as a loan from a director in the case of a small company, or a public benefit entity concessionary loan.

Financial assets that are measured at cost and amortised cost are assessed at the end of each reporting period for objective evidence of impairment. If objective evidence of impairment is found, an Impairment loss is recognised in the Statement of comprehensive income.

For financial assets measured at amortised cost, the impairment loss is measured as the difference between an asset’s carrying amount and the present value of estimated cash flows discounted at the asset's original effective interest rate. If a financial asset has a variable interest rate, the discount rate for measuring any impairment loss is the current effective interest rate determined under the contract.

For financial assets measured at cost less impairment, the impairment loss is measured as the difference between an asset's carrying amount and best estimate of the recoverable amount, which is an approximation of the amount that the Company would receive for the asset if it were to be sold at the balance sheet date.

Financial assets and liabilities are offset and the net amount reported in the Balance sheet when lhere is an enforceable right to set off the recognised amounts and there is an intention to settle on a net basis or to realise the asset and settle the liability simultaneously.


 

3	Staff numbers

The average number of persons employed by the company (including directors) during the year, was 8 (2024 - 7).

Dtec Fabrications Limited

Notes to the Unaudited Financial Statements for the Year Ended 31 December 2025

4	Tangible assets

	Land and buildings £	Furniture, fittings and equipment  £	Motor vehicles  £	Other tangible assets £
Cost or valuation
At 1 January 2025	200,000	12,321	29,594	95,237
Additions	-	-	24,830	33,250
At 31 December 2025	200,000	12,321	54,424	128,487
Depreciation
At 1 January 2025	29,440	7,595	29,122	53,766
Charge for the year	4,000	708	4,256	15,249
At 31 December 2025	33,440	8,303	33,378	69,015
Carrying amount
At 31 December 2025	166,560	4,018	21,046	59,472
At 31 December 2024	170,560	4,726	472	41,471

	Total £
Cost or valuation
At 1 January 2025	337,152
Additions	58,080
At 31 December 2025	395,232
Depreciation
At 1 January 2025	119,923
Charge for the year	24,213
At 31 December 2025	144,136
Carrying amount
At 31 December 2025	251,096
At 31 December 2024	217,229

Included within the net book value of land and buildings above is £166,560 (2024 - £170,560) in respect of freehold land and buildings.
 

Dtec Fabrications Limited

Notes to the Unaudited Financial Statements for the Year Ended 31 December 2025

5

Stocks

	2025 £	2024 £
Other inventories	27,150	40,566

6

Debtors

Current	2025 £	2024 £
Trade debtors	124,154	31,551
Prepayments	19,413	19,045
	143,567	50,596

7

Creditors

Creditors: amounts falling due within one year

	2025 £	2024 £
Due within one year
Trade creditors	144,738	106,177
Taxation and social security	96,420	115,154
Accruals and deferred income	4,760	3,900
Other creditors	4,553	11,892
	250,471	237,123

8	Share capital

Allotted, called up and fully paid shares

	2025		2024
	No.	£	No.	£
Ordinary Shares of £1 each	200	200	200	200

Dtec Fabrications Limited

Notes to the Unaudited Financial Statements for the Year Ended 31 December 2025

9	Financial commitments, guarantees and contingencies

Amounts not provided for in the balance sheet

The total amount of financial commitments not included in the balance sheet is £5,832 (2024 - £7,128).

10	Related party transactions